Logo
Gosund SP1 Power Monitoring Plug
EU
Gosund SP1
GPIO #Component
GPIO00 None
GPIO01 Led_i 2
GPIO02 None
GPIO03 Button 1
GPIO04 BL0937 CF
GPIO05 HLWBL CF1
GPIO09 None
GPIO10 None
GPIO12 HLWBL SELi
GPIO13 Led_i 1
GPIO14 Relay 1
GPIO15 None
GPIO16 None
GPIO17 None
Configuration
{"NAME":"Gosund SP1 v23","GPIO":[0,321,0,32,2720,2656,0,0,2624,320,224,0,0,0],"FLAG":0,"BASE":55}

This device now comes with a Wi-Fi module incompatible with Tasmota

For more accurate energy consumption measurements this device requires power monitoring calibration.

Use code BLAKADDER23 when buying from mediarath.de Tasmota category and a minimum order value of 50€ for a 10% discount. The code is valid until end of 2023.

There are three clones – use the device type Teckin:

  • Gosund SP1 (Version 2.3)
    • To configure select Gosund SP1 v23 (55) or console command Module 55
  • Gosund SP1 (Version 2.4)
    • To configure select Gosund SP1 v23 (55) or console command Module 55
  • BlitzWolf SHP2 (Version 2.3)

For more pictures see: https://www.bastelbunker.de/gosund-sp1-mit-tasmota/

For power monitoring calibration see wiki

Details

Board - copy from issues/4303

Pins - copy from issues/4303

GPIO 0 - copy from issues/4303