Logo
XS-SSA05 Power Monitoring Plug
US
XS-SSA05

Available from:
Amazon.com





Manufacturer:
Alibaba.com


GPIO #Component
GPIO00 Led_i 1
GPIO01 None
GPIO02 None
GPIO03 HLWBL SELi
GPIO04 LedLink
GPIO05 HLW8012 CF
GPIO09 None
GPIO10 None
GPIO12 Relay 1
GPIO13 Button 1
GPIO14 HLWBL CF1
GPIO15 None
GPIO16 None
GPIO17 ADC Input 1
Configuration
{"NAME":"XS-SSA05","GPIO":[320,0,0,2624,544,2688,0,0,224,32,2656,0,0,4704],"FLAG":0,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.

Sold under many names

Do not connect AC power and the serial connection at the same time

  • To flash, open up the case, and the pads are at the BOTTOM side. Luckily all of them are near the edge and can be accessed without removing the board.
  • Solder 3V3, GND, TX, RX, and Ground IO0 pin during flash
  • DISCONNECT FROM MAIN POWER before connecting to the serial-USB adapter!!
  • Can be flashed via Web Flasher

For photo reference see page 2 and 3 fcc.report