Logo
Globe Smart Plug
US
Globe Smart

Available from:
Canadiantire.ca







Install method:
Replace module

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Led1i
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 Relay1
GPIO13 None
GPIO14 Button1
GPIO15 None
GPIO16 None
FLAG None
Configuration (old format, will be converted to new template when applied)
{"NAME":"GlobeSmartPlug","GPIO":[0,0,0,0,56,0,0,0,21,0,17,0,0],"FLAG":0,"BASE":18}
This device uses CB2S module which needs to be replaced with ESP-02S, WT-01N or WT32C3-01N. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.

If you do open it up, it contains a CB2S Tuya module solder mounted vertically on the main board. The soldered module can be replaced with an ESP-01N chip on a WT-01N or WT32C3-01N module. Besides the module, this process will require soldering tools and moderate soldering skill.